Includes mounting hardware.

This is replacement bungee for manual Pro-Lok roll tarp systems

• Cord is 11'6'' long.
• Perfect for 8' wide boxes.

This aluminum tarp stop comes standard in every Pro-Lok® Kit but its also universal for any roll tarp system!
Includes mounting hardware.

Includes mounting hardware.

Ridge Strap Assembly

Includes: PVC, Bungee, and Bungee End Plug

Includes mounting hardware.

Reinforce your tarp on windy days with windstraps. They are an excellent way to protect your tarp from tears.

HOW TO INSTALL WINDSTRAPS.

• Tools needed: Tape Measure, Sharpie Marker, 9/16’’ Socket, Impactor, Drill

and 5/16’’ Drill Bit

•STEP 1Place the cords at 1/4 trailer length from the front and 3/4 trailer length from the front just behind the tarp bow.

•STEP 2 Drill a 5/16’’ hole just below the frame on a rivet row between two rivets on the passenger side. Secure the cord with a self threader.

•STEP 3Loosen your tarp so it hangs down on the driver side, mark and drill a 5/16’’ hole just below the tarp between two rivets on the rivet row. Secure the cord with a self threader.

Pro-Lok Replacement tarps are for sidelock style roll tarp systems. One end of the tarp has a pocket to accomodate a 1 1/8" fastening tube and the other side has a pocket to accommodate a 2 " roll tube.

Premature wear & tear.
The import fabric shows poor adhesion & minimal coating resulting in cracking, crazing & yarn exposure.
VS.
Pro-Lok fabric has an abrasion resistant coating on both sides of the fabric to increase wear resistance especially at potential wear spots ex. bow section.